Share:
MELLO TIG200P AC/DC (IGBT) 1 Phase Square Wave Pulse Tig Welding Machine , Input Power (MMA:7) (TIG:4.6) KVA , Output Power (MMA:40-200)(TIG:5-200) , 18Kg
Category:
ARC/TIG/Pulse AC/DC
| ITEM/MODEL | UNIT | TIG200P AC/DC (IGBT) |
| Input Power Voltage / Freq. | V/Hz | AC240V/ 50/60Hz |
| Rate Input Power Capacity | KVA | MMA : 7 TIG : 4.6 |
| Rated Input Current | A | MMA : 31.8 TIG : 20.9 |
| No-load Voltage | V | 60 |
| Output Current Range | A | MMA : 40-200 TIG : 5-200 |
| Rated Output Voltage | V | MMA : 28 TIG : 18 |
| Post-gas time | S | TIG : 0-10 |
| Pre-flow time | S | TIG : 0-10 |
| Pulse current | A | TIG : 5-200 |
| Slope-down time | S | TIG : 0-10 |
| Pulse Frequency | Hz | TIG : 0.1-20 |
| Pulse Width | % | TIG : 10-90 |
| Duty Cycle (25ºC) | % | 60 |
| No-load comsumption | W | 60 |
| Efficiency | % | 85 |
| Power Factor (cosØ) | 0.93 | |
| Insulation Class | F | |
| Weight | KG | 14 (N.W) / 18 (G.W) |
| Dimension (LxWxH) (CTN) | mm | 580 x 315 x 415 |
| Protection Class | IP21S | |
| Accesories | 1) 3 core power cable with 13A 3 pin plug. 2) 300A Earth Clamp with 3M 25mm² welding cable & KDP50 plug. 3) WP26 TIG Torch(Double line) 4M (Rubber cover) with KDP50 plug & set accessories & 1pc grey Tungsten 2.4mm. 4) 3M 5/16'' hose with 2pcs hose clip. |
Inquiry - MELLO TIG200P AC/DC (IGBT) 1 Phase Square Wave Pulse Tig Welding Machine , Input Power (MMA:7) (TIG:4.6) KVA , Output Power (MMA:40-200)(TIG:5-200) , 18Kg
View more
ARC/TIG/Pulse AC/DC
